Tesla Walk Away Lock Not Working
Tesla walk-away lock not working when you get out of your car? No problem at all because I have compiled a list of some of the most common reasons why this could be happening to you. All you have to do is read out that list and try to understand all the root causes of this issue.
Once you understand why this happens, only then you resolve your problematic walk-away lock situation. In fact, I have picked out the top four of the most likely reasons why this malfunction takes place in the first place namely, firmware incompatibility with the software, system failure, incorrect settings, and faulty driver’s seat sensor. For further details, keep reading down below.
You Might Also like to Read: Tesla Phone Key Not Working After Update
Tesla Walk Away Lock Not Working
1. Firmware Not Matching With The Software
One of the most prominent reasons why your walk-away lock might not be working right is that your firmware is clashing with the software. This incompatibility occurs when your Tesla software stays outdated for a prolonged period of time. So, to solve this issue, you will have to update your software as soon as possible.
So to initiate the software update, use your dashboard touchscreen to go to settings. From the settings drop-down, click on the “Controls” options and then on “Software”. A new window will pop up with an option saying “Software Update”.
Click on this update option and let the update begin. This process might take some time since the update will start installing immediately after the update completes. Hopefully, this will solve your walk-away lock malfunction.
2. System Failure
Another potential reason why your Tesla walk-away lock might not be working is the system failure. This is absolutely natural and you can easily solve this issue by simply rebooting your Tesla. So, for that, press and hold the scroll button appearing on the touchscreen for about ten seconds.
Another thing that you can do is power off the car. For that, use the touchscreen to go to the “Controls”.
From the menu, click on the option saying “Safety” and then on “Power Off”. Let the car stay powered off for at least one minute, and then open the door to bring the car back to life.
Other than that, you could also hard reset the Tesla car. So, for that, open the trunk of the car and remove the battery cover.
After that, disintegrate the 12V battery ground wire and high-voltage loop plug. Wait for a good ten minutes before reattaching everything and activating your car.
3. Incorrect Settings
Incorrect settings are yet another very common reason why your Tesla’s walk-away lock might not be working properly. Sometimes, we mess up the car settings in our own ignorance or lack of knowledge about the settings and controls of the car.
So, to solve this problem, all you have to do is choose the “Controls” option on the dashboard touch screen. After that, click on the “Locks” option.
In the resulting menu, you will see the “Walk-away Door Locks” option. Set it to “On” to enable its effect.
Other than that, if you are using the Tesla app, you should enable the Bluetooth option from the app settings on your cell phone. However, you should keep in mind that you can not do it from within the app.
Instead, you will have to open up your phone’s settings and then go to the “Apps” option. From the list of all your cellphone apps, locate the Tesla app.
A new window will open up displaying all the settings of this app. Enable the Bluetooth option and you will be good to go!
4. Faulty Driver’s Seat Sensor
Another possible reason why your Tesla walk-away lock might be malfunctioning is that there is something wrong with the driver’s seat sensor. However, this is a very technical issue and you can not do anything about it yourself. So, unless you are a trained professional mechanic, I suggest you consult one to get this issue resolved.
FAQs
Why doesn’t my Tesla lock automatically when I walk away from the car?
The reason why your Tesla might not lock automatically when you walk away is that your walk-away lock is malfunctioning. It could be due to a system failure, firmware and software incompatibility issues, faulty driver’s seat sensors, or incorrect lock settings. So, you are going to have to identify the root cause of the issue before you can fix it.
How can I activate my walk-away lock through the Tesla’s dashboard touchscreen?
If your Tesla walk-away lock is not yet activated, all you have to do is use the dashboard touchscreen and click on the “Controls” option on the dashboard touch screen. After that, click on the “Locks” option.
In the resulting menu, you will see the “Walk-away Door Locks” option. Set it to “On” to enable its effect.
What do I do if my walk-away lock stops working due to a faulty driver’s seat sensor?
If your Tesla walk-away lock is malfunctioning because of a faulty driver’s seat sensor, then there is not much you can do. Tesla’s sensors are highly technical and need expert handling. So, you should get your car checked by a professional rather than fumbling with the sensors yourself.
The Bottom Line
So, it is safe to say that the walk-away lock of Tesla might be malfunctioning due to a number of factors. And if you want to get this issue resolved, you need to understand the root cause of the issue and then target that specific issue to get your walkaway lock to start working again.
Some of the most common reasons behind this malfunction include system failure, faulty driver’s seat sensors, incorrect settings, and firmware not matching with the software. Once you identify the root cause, you can easily get it resolved in no time at all.
More Helpful Guide:
